DJM600 was one of Pioneer first entries into the DJ market and it was embraced by DJ's world over. Solid build quality and maximum control for the bedroom or professional DJ's alike.

Music Event / Festival / Concerts
Dance Party / Nightclubs
Party Hire / Special Event

Overview

Auto BPM Counter
Equipped with a counter that automatically measures and digitally displays a track's BPM measurement range: 70-139 / 91-180 / 71-180 / Manual The DJM-600 provides a visual confirmation of a track's tempo to allow the user to merge one song into another smoothly. Also, BPMs of tracks that are difficult to measure can be manually input by tapping on the TAP button.

Auto Beat Sampler
This is a new DJ function that allows you to sample your favourite sources and play them back easily at the touch of a button. The BPM is measured digitally and recorded automatically exclusively for designated beats: ( 1 / 2 / 4 / 8 / 16 ) beats, Maximum interval: 6 seconds.

If set to the Stand-By mode when no sound is present, the function automatically starts and stops recording in response to the presence and absence of the input signal and achieves the correct sampling with perfect timing. What's more, the user can edit the end position, making possible a wide diversity of playback effects by making use of three playback mode options and the cross fader start.

Plays back the recorded sound once only when the button is being pressed.

Plays back the recorded sound repeatedly when the button is pressed.

Extends or shortens the recorded sound in accordance with the mixed track's BPM and plays back the sound repeatedly.

Sampler info:
Sampling rate: 44.1 kHz
Resolution: 16 bit stereo
A/D converter 20 bit
Sampling time 8 seconds

Auto Beat Effector
Linked to BPM, the DJM-600 can add effects to each CH, MIC and MASTER independently. The user can produce music that makes full use of high-level DJ techniques by performing quick setting with the Beat Unit Switch button, adjusting the precise time parameters, or controlling the balance between the effect sounds and the original sounds by varying the mix ratio. Moreover, even when using the fader, it is possible to leave just the effect sounds without linking to BPM.

Delay: Repeats a sound once. The user can set the delay to their desired tempo.<

Echo: Repeats a sound several times. The user can set the echo sound to their desired tempo.

Auto Pan
Automatically shifts the sound to the right and left. Also capable of short auto pan sequences that would be impossible via manual operation.

Auto Trans
Periodically cuts the sound.

Auto Filter
Periodically varies the sound color.

Flanger
Periodically reproduces a sound effect resembling a jet airplane ascending and descending.

Reverb
Reproduces a reverberating sound effect.

Pitch Shifter
Allows the interval to be freely varied throughout a range of +/-1 octave. With this, the user can compensate for interval changes when using analog turntables or for tempo changes when different makers' CD players are used. Additionally, choruses can be made by employing mix ratios.

Faders Start Play
Connected to the CDJ Series, the DJM-600 can begin playback of a track using the sliding cross fader or the channel fader. It can mix tracks without creating spaces by setting the stand-by track's cue point and performing a single-action cut-in. Since it returns to the cue point via the back fader alone, sampler-style playback is also possible. Start/back play of sources recorded using the built-in sampler is also possible using the cross fader.

Equalizers
The DJM-600 is equipped with a separate HI/MID/LOW 3-band equalizer for each channel. This arrangement allows the stress of the instrument sounds to be adjusted within the range -26dB to +12dBfor an improvement of about 100% (Pioneer comparison) in sound extraction.

(MX-002)

SKU MX-002
Model # DJM600
Brand Pioneer

Be The First To Review This Product!

Help other AVDJ Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review