Amplify RGBHV source over distances
Split one RGBHV source to 2 outputs
Music Event / Festival / Concerts
Dance Party / Nightclubs
Large Scale Product Launches / Presentations
Party Hire / Special Event
Product Launches / Presentations
500 MHz Video Bandwidth - The IN3252HR offers extremely wide bandpass characteristics, ensuring compatibility with analog video signals at any resolution and refresh rate. While specifically designed for RGBHV signals, the unit may also be used with RGBS, RGsB, component, Y/C and composite video signals such as NTSC, PAL, or SECAM.
Line Driver - Boosts and Equalizes Signals to Compensate for Long Cable Runs
Individual Gain Controls for Red, Green and Blue Signals - Boost Signal Voltage up to 40%
Sharpness Control Provides High Frequency Signal Equalization
BNC Input and Output Connectors
Compatible with RGBHV, RGBS, RGsB, RsGsBs, Component, Y/C, High Resolution Monochrome Video and Composite Video Baseband Signals
Loop Output - Provides a High Z Passive Loop-Through which can Feed Additional Amplifiers or a Local Monitor.
|Input Connector||5 BNC female for RGBHV|
|Input Video||1.5 Vp-p max.|
|Input Termination||75 Ohm (factory default) or High Z (unterminated)|
|Input Sync||TTL Compatible - 0.5 to 5.0 Vp-p|
|Output Connectors||Two sets of 5 female BNC for RGBHV|
|Output Video||75 Ohm impedance|
|Output Gain||0.7 (30% decrease) to 1.4 (40% increase)|
|Bandwidth||500 MHz @ -3dB|
|Internal Jumpers||Input Termination - 75 ohm/High Z; AC / DC Coupling|
|Power Supply||9 VDC, 500 mA external adapter included|
|Power Consumption||4 Watts|
|Projection Lens||F1.7-2.5 / f0.76”-1.19”|
|Dimensions||13.3cm x 13.0cm x 4cm|
Be The First To Review This Product!
Help other AVDJ Ltd users shop smarter by writing reviews for products you have purchased.